RAD Products and Services Are Available From Cutter Networks 727-398-5252- Your Best DataCom Source for RAD

RAD


ETX-2i-100G High Speed Carrier Ethernet Demarcation and Aggregation

ETX-2i-100G from RAD

ETX-2i-100G from RAD
High Speed Carrier Ethernet Demarcation and Aggregation
ETX-2i-100G front view
• High Speed service aggregation platform addresses the ever increasing need for more high-bandwidth services at the network edge.
• Capable of delivering up to 100GbE to Business customers and Data Center Connectivity applications.
• The 100G device provides a small footprint (1RU, 19”) and low-power consumption solution means to address today’s key network challenges.

The global proliferation of mobile, video, and cloud applications creates an increasing demand for high-bandwidth access, generating new opportunities for communication service providers.

ETX-2i-100G from RAD is designed to address the demand for demarcation and aggregation of agile, reliable, and assurable services at data rates that exceed 10Gbps.

RAD ETX-2i-100G is capable of delivering up to 100 GbE services using a mix of 10GbE and 100GbE interfaces, while offering Carrier Ethernet 2.0 compliant service models, service monitoring, flexibility, and manageability.

ETX-2i-100G Flexible Service Delivery and Assurance up to 100G

ETX-2i-100G enables operators to deliver service level guarantees, by supporting multi-layer diagnostics, fine-grained SLA enforcement, and accurate performance monitoring. Built-in service activation testers support verifying end-to-end network performance.

ETX-2i-100G best in class traffic management capabilities include an advanced classification engine, VLAN manipulation, and sophisticated service shaping that provide operators full flexibility and control over traffic flows. ETX-2i-100G support for hierarchical QoS enables delivery of multiple prioritized service types along with best effort services, while efficiently utilizing available network bandwidth.

SDN Ready Management and Control of RAD ETX-2i-100G

ETX-2i-100G leverages RAD’s field-proven, carrier grade operating system – integrated in the entire ETX-2 family – to provide a familiar and uniform interface for provisioning, administration, and maintenance operations.

ETX-2i-100G can be managed using RADview, RAD’s carrier-class NMS, or any SNMP-based management system. The device supports a variety of access protocols, including CLI over Telnet, SNMPv3, and TFTP, with a comprehensive security suite.

ETX-2i-100G implements RAD’s unique ZTP process, allowing devices to onboard automatically and securely without human intervention, and enabling operators to provision services easily and reliably.

ETX-2i-100G is delivered ready for SDN transformation with comprehensive support for the NETCONF/YANG protocol, enabling operators to utilize modern network service orchestrators.

RAD ETX-2i-100G FEATURES AND BENEFITS

• Three 100GbE plus ten 1/10GbE interfaces (SFP+)
• MEF-compliant service topologies, including E-Line, E-LAN, E-Tree, E-Access, and E-Transit services
• ITU-T G.8031 Ethernet linear protection, with sub-50 ms restoration time
• Advanced QoS, with hierarchical policing and bandwidth shaping per EVC and EVC.CoS
• Accurate, scalable hardware-based OAM and PM (ITU-T Y.1731 and TWAMP)
• ITU-T Y.1564 service activation testing at wirespeed
• Advanced management capabilities, fully compatible with the ETX-2 family and supported by RADview EMS/NMS and Performance Monitoring portal
• NETCONF/YANG support for intelligent service orchestration
• Zero touch provisioning (ZTP) for scalable, secure, and rapid service rollout
• Redundant, hot-swappable AC or DC power supply
• Low power consumption for cost effective operation
• 19” 1RU form factor

Specifications of the RAD ETX-2i-100G

INTERFACES


Ethernet Ports
Three 100GbE (QSFP28)
Ten 1/10GbE (SFP+)

Management Port of the RAD ETX-2i-100G
Type: 10/100/1000BaseT
Connector: RJ-45

Control Port
Interface: V.24/RS-232 DCE
Connector: Mini USB
Format: Asynchronous
Data rate: 9.6, 19.2, or 115.2 kbps

BRIDGE
Max. Frame Size
12,288 bytes

Compliance
802.1D, 802.1Q, 802.1ad

Mode
VLAN-aware, VLAN-unaware
VLAN Editing
Inner/outer VLAN editing per VLAN and p-bit values

Traffic Management using the RAD ETX-2i-100G

Classification
Per port, outer VLAN or outer + inner VLAN, PCP, TOS/DSCP, EtherType, IP/MAC source/destination address

Policing
Color-aware/unaware dual token bucket with user-configurable CIR, CBS and EIR, EBS

Scheduling
Eight CoS per EVC scheduling elements
Strict Priority (SP) and Weighted Fair Queue (WFQ)

Shaping
Per port, per EVC, or per EVC.CoS

OAM and Diagnostics of the ETX-2i-100G from RAD

IEEE 802.1ag Connectivity Fault Management (CFM)
IEEE 802.3ah EFM Link-fault OAM
ITU-T Y.1731 PM (SLM; DM)
RFC 5618 TWAMP responder and receiver
TWAMP sender

Service Activation Tests
RFC-2544: 8 built-in testers
ITU-T Y.1564: 8 built-in testers

Loopback Tests
Non-disruptive loopback per flow, with MAC/IP address swap
Loopbacks at Ethernet port level

ICMP Echo
Over L2 and L3 services
Tests IP connectivity (PING)

Resiliency

Ethernet Path Protection
G.8031 linear 1:1 protection

Link Aggregation
Load balancing LAG with up to 4 ports in a LAG group (on 10G ports)

Managemenet of the ETX-2i-100G from RAD

Management Options
Local management via LAN port or serial port
Remote management via in-band VLAN
Password-protected access with authorization levels

Protocols and Security
Secure CLI via SSH
Telnet, SNMPv3, SFTP
NETCONF/YANG management interface
Dual Stack IPv4 and IPv6
RADIUS or TACACS+ authentication
Access Control List (ACL)
Configuration backup and restore

Plug and Play Zero Touch Provisioning

DHCP auto-configuration
XML configuration files download via TFTP/SCP

Electrical

Power Supply
Hot swappable, redundant PS
AC: 100-240 VAC (±10%), 50/60 Hz
DC: 48 VDC (40-60 VDC)
Power consumption: 350W

Dimensions of ETX-2i-100G

19” enclosure:
Height: 44 mm (3.46”)
Width: 440 mm (17.32”)
Depth: 400 mm (15.75”)

Environmental

Storage Temperature: -40 to 85°C (-40 to 185°F)
Operating Temperature: 0 to 50°C (32 to 122°F)
Humidity: 5% to 90%, non-condensing

ETX-2i-100G Standards and Compliance

CE 2.0, MEF 6 (E-Line – EPL and EVPL, E-LAN – EPLAN and EVPLAN), MEF 9, MEF10, MEF 14, MEF 20, MEF 36, MEF 46, IEEE 802.3, 802.3u, 802.1D, 802.1Q, 802.1p, 802.3ad,
802.3-2005, 802.1ax, 802.1ag, ITU-T Y.1731, G.8031, G.8262, G.8265, RFC-2544, ITU-T Y.156

Recommended Configuration

ETX-2I-100G/ACR/3QSFP/10SFPP
Redundant AC and/or DC power supply, 1U 19" metal enclosure,
3 QSFP28 Ethernet ports, 10 SFP+ Ethernet ports

SUPPLIED ACCESSORIES
AC power cord
RM-50 HW kit for mounting 19" unit in a 19" rack

OPTIONAL ACCESSORIES
CBL-MUSB-DB9F - Mini-USB cable to connect device to a serial port
ETX-2I-100G-PS/AC - Single AC power supply
ETX-2I-100G-PS/DC - Single DC power supply
RM-53 HW kit for mounting 19" unit in a 19" rack 100mm deep installation

Data sheet for RAD ETX-2i-100g Data sheet for RAD ETX-2i-100g