Transition Networks

S4TEF1014-110 and S4TEF1015-110 4 x T1/E1/J1 + Ethernet Fiber Mux

There are several models of the Transition Networks S4TEF10xx-11x. Two popular models are S4TEF1014-110 and S4TEF1015-110.

Other models of this Transition Networks product include: S4TEF1011-110, S4TEF1013-110, S4TEF1014-110, S4TEF1015-110, S4TEF1016-110, S4TEF1017-110, S4TEF1035-110, S4TEF1029-110, S4TEF1029-111, S4TEF1029-112, S4TEF1029-113, S4TEF1014-120

The differences in the Transition Networks models specify options such as  SC or ST fiber connectors, dual fiber or single fiber, single mode or multimode fiber and of course the range needed on the fiber link. 

 

S4TEF10xx-11x ( S4TEF1014-110 / S4TEF1014-120 and S4TEF1015-110 )4x T1/E1/J1 + Ethernet fiber mux features  include:

Auto-Negotiation for 10/100BASE-TX
AutoCross™ (auto MDI/MDI-X)
Transparent Link Pass Through for Ethernet
Automatic Link Restoration
Pause (Flow Control)
Remote Management
Local and Remote Loopback
Remote Fiber Loss Signaling
AIS/TAOS
LEDs for each data port
DIP switches for line code, line length, local loopback or remote loopback
T1/E1/J1 mode settings
Dry Relay Contacts on each TDM port
Local (AUX) Management Interface (RS232 connector)
Switch selection for Data or Management mode on RS232 interface
Access to complete status information on local and remote device
Access to local and remote configuration
Switch or SNMP selected Baud rate operation
Remote Firmware Upgrade

Used in pairs the Transition Networks 4x T1/E1/J1 + 10/100 Ethernet Transport Mux S4TEF10xx-11x ( S4TEF1014-110 and S4TEF1015-110 )4x T1/E1/J1 + Ethernet fiber mux provide low cost transport capability. Target applications include: FTTx, such as Fiber-to-the-Business, Fiber-to-the-Building, Fiberto- the-MDU and Fiber-to-the-Home.

These Transition Networks products offer a low cost transport capability for four T1/E1/J1, one Ethernet and one data
channel line (x4TEF10XX-11X). The offering will provide copper connections compatible with G.703,
AMI/B8ZS/HDB3, 10/100BASE-TX, as well as RS232 channel; while the optical connection will run
at 155Mbps. TDM traffic is not mapped to Ethernet. A hardware-based solution guarantees the
constant bit rate of TDM transport without requiring traffic management. The product provides
physical layer status monitoring, alarm classification and data classification functions for Telecom
providers to manage their fiber optic network and reduce operation and maintenance costs. Target
applications of the device include: FTTx, such as Fiber-to-the-Business, Fiber-to-the-
Building, Fiber to-the-MDU and Fiber-to-the-Home.

 

Models of this Transtion Networks product include:

S4TEF1011-110, S4TEF1013-110, S4TEF1014-110, S4TEF1015-110, S4TEF1016-110, S4TEF1017-110, S4TEF1035-110, S4TEF1029-110, S4TEF1029-111, S4TEF1029-112, S4TEF1029-113, S4TEF1014-120

Product data sheet for the Transtion Networks S4TEF1014-110 and S4TEF1015-110