|
RAD Multiprotocol PAD/FRAD and Packet
Switches
RAD APD-8 8-Channel FRAD/X.25 PAD
8-channel async FRAD / X.25 PAD
Async data rate up to 115.2 kbps
SLIP/PPP supported on all async ports
One synchronous Frame Relay / X.25 link operating at data rate of up to 2 Mbps
Telnet client / server to support terminal / server applications
SNMP management via RADview PC/UNIX platforms
FLASH memory for software upgrade
RA
D APS Multiprotocol PAD/FRAD and Packet Switches
The 8, 16 or 24 Async channel FRAD / X.25 PAD with three multiprotocol ports
Async data rate up to 115.2 kbps
SLIP/PPP supported on all Async ports
Protocols supported: Frame Relay, X.25, IP, HDLC, SLIP, PPP, ML-PPP and Async
IP support:
RIP1, RIP2 and static routing
Standard IP encapsulation over Frame Relay (RFC 1490), or X.25 (RFC 1356) networks
Standard bridging
Telnet client / server to support terminal / server applications
SNMP management using RADview PC / UNIX platforms
Optional built-in Ethernet interface, allowing easy integration of LAN segments
Optional support for ISDN: Frame Relay / X.25 / PPP / ML-PPP can be transmitted over the ISDN media
FLASH memory for software upgrade
RAD APS-16 Multiprotocol PAD/FRAD and Packet Switches
RAD APS-24 Multiprotocol PAD/FRAD and Packet Switches
RAD APS-8 Multiprotocol PAD/FRAD and Packet Switches
RAD APS-Modules
RAD FPS-8
Eight port FRAD/PAD and multiprotocol packet switch
Protocols supported: Frame Relay, X.25, IP, HDLC, SLIP, PPP, ML-PPP and Async
Each multiprotocol port operates at data rates of up to 2 Mbps
Throughput of over 3000 Packets Per Second (PPS) in Frame Relay mode
IP support:
RIP1, RIP2 and static routing
Standard IP encapsulation over Frame Relay (RFC 1490), or X.25 (RFC 1356) networks
Standard bridging
Telnet client / server to support terminal / server applications
SNMP management using RADview PC/UNIX platforms
Optional built-in Ethernet, allowing easy integration of LAN segments
Optional support for ISDN: Frame Relay / X.25 / PPP / ML-PPP can be transmitted over the ISDN media
RAD SPS-12 FRAD/PAD and multiprotocol packet switch
Protocols supported: Frame Relay, X.25, IP, HDLC, SLIP, PPP, ML-PPP and Async
IP support:
RIP1, RIP2 and static routing
Standard IP encapsulation over Frame Relay (RFC 1490), or X.25 (RFC 1356) networks
Standard bridging
Telnet client / server to support terminal / server applications
SNMP management using RADview PC / UNIX platforms
Optional built-in Ethernet, allowing easy integration of LAN segments
Optional support for ISDN: Frame Relay / X.25 / PPP / ML-PPP can be transmitted over the ISDN media
FLASH memory for software upgrade
RAD SPS Modules
RAD SPS-6 FRAD/PAD and multiprotocol packet switch
Protocols supported: Frame Relay, X.25, IP, HDLC, SLIP, PPP, ML-PPP and Async
IP support:
RIP1, RIP2 and static routing
Standard IP encapsulation over Frame Relay (RFC 1490), or X.25 (RFC 1356) networks
Standard bridging
Telnet client / server to support terminal / server applications
SNMP management using RADview PC / UNIX platforms
Optional built-in Ethernet, allowing easy integration of LAN segments
Optional support for ISDN: Frame Relay / X.25 / PPP / ML-PPP can be transmitted over the ISDN media
FLASH memory for software upgrade
RAD SPS-3S Multiprotocol Packet Switch. The SPS - 3S is a 3-port
FRAD/PAD and multiprotocol packet switch intended for the remote branch office. The device supports aggregated data rate of up to 2 Mbps.
Typical applications include: access for the small office in a multi-protocol environment (see Figure 1), protocol converter and consolidation of LAN traffic for transmission over Frame Relay, X.25 or ISDN networks.
Other RAD Packet switches
|
